centos-Lacp

dhclient -r 释放ip
ip addr del 10.0.0.136 dev ens33 删除ip 地址

链路聚合1 错误删除nmcli connection delete team0
nmcli connection add type team con-name Team1 ifname teame1 config ‘{“runner”:{“name”:“activebackup”}}’ 创建链路聚合组Team1

nmcli connection add type team-slave con-name Team1-slave1 ifname eth1 master Team1 加入Eth1 到聚合组中

nmcli connection add type team-slave con-name Team1-slave1 ifname eth2 master Team1 加入eth2 到聚合组中

nmcli connection modify Team1 ipv4.addresses 172.16.1.65/24 ipv4.method manual 配置聚合链路IP地址

nmcli connection up Team1 重启聚合网卡
teamdctl Team1 state 验证

链路聚合2

nmcli connection add type team con-name team0 ifname team0 autoconnect yes config ‘{“runner”: {“name”: “activebackup”}}’ 创建 team0聚合组
nmcli connection add type team-slave con-name team0-2 ifname eth2 master team0 加入Eth1 到聚合组 team0中
nmcli connection add type team-slave con-name team0-1 ifname eth1 master team0 加入Eth2 到聚合组 team0中

nmcli connection modify team0 ipv4.method manual ipv4.addresses 192.168.1.1/24 connection.autoconnect yes 配置聚合组ip

nmcli connection up team0 激活配置

teamdctl team0 state 查看详细信息

链路聚合3
nmcli connection show //查看网络设备
nmcli connection delete br0 //看到有什么就删除什么
watch -n 1 cat /proc/net/bonding/bond0 //暂时没有此文件，文件名不可补全，需要手动输入
nmcli connection add con-name bond0 ifname bond0 type bond mode active-backup ip4 172.25.60.20/24
nmcli connection add con-name eth0 ifname eth0 type bond-slave master bond0
nmcli connection add con-name eth1 ifname eth1 type bond-slave master bond0
cat /proc/net/bonding

添加路由
route add -net 192.168.1.0 netmask 255.255.255.0 gw 192.168.1.1
route add -net [目的地] [网关]
route add default gw 192.168.1.1 添加默认路由